VR3350D
Vicut
OVERVIEW
VR3350D is perfect for short to medium length print finishing, and even more enticing is the ability to automatically sheet to size without any additional equipment. You can use the sheeting system inline with cutting, or as an offline solution to cut roll products to any length needed!
DETAILS DECRIPTION
sqe | description |
1 | Multiple die cutting heads. VR3350D works with multiple die cutting heads, up to 12 heads(3 stations) work at once, highly increase working efficiency. |
2 | CCD Camera Identify System. The CCD camera positioning and identify system can recognize the sequence codes of each jobs,so that job exchanges can be done automatically smooth during feeding and cutting. |
3 | Reflective photoelectric mark sensor. The positioning sensor scans the marked points printed on the material to obtain the cutting dies information and feed it back to the machine control system, so as to realize the digital cutting. |
4 | High Precision feeding Detection System(BST from Germany). Utilizing high precision ultrasonic web-guide system from Germany, make sure the paper feeding in correct way, ready for next die cutting step. |
5 | Cold lamination. Automatic lamination before die cutting, makes finishing labels more durable and more widely application. The back liner film remover is optional. |
6 | Automatic waste removal and tension system. Under the 6-axis automatic tension of the waste discharge system, the label cutting waste paper will be automatically removed and separated from the winding, so as to obtain a clean label roll for the next process. |
7 | Slitting system. Utilize square blades, automatically cut the label paper into small rolls as needed,up to 15pcs blades can be used. Maximum slitting speed can reach to 100m/min. |
8 | Down rewinder. Default main rewinder for roll to roll process. |
9 | Easy-to-use dedicated software. Running status can be seen in a real-time. Support file database. Choose the quantity of the heads based on graphics. Intelligent cutting with trajectory optimization. Adjust heads distance automatically. Auto-generate the working records. |
10 | Upper rewinder. (Optional) Optional upper rewinder to separate labels in every second row after slitting. |
11 | Inline Roll to Sheet Cutting System.(optional) The optional built-in sheet cutting module can be in-lined with the main die-cutting to perform the roll to sheet cutting process. |
12 | Film base paper removing device.(optional) In some areas, there is backing paper on the cold laminating film, which can be removed before laminating by this device. |
APPLICATIONS
Applicable Industry: VR3350D is mainly used in making all kinds of labels,Stickers, Paper, PP, BOPP, PET, PVC
SAMPLES
OVERVIEW
VR3350D is perfect for short to medium length print finishing, and even more enticing is the ability to automatically sheet to size without any additional equipment. You can use the sheeting system inline with cutting, or as an offline solution to cut roll products to any length needed!
DETAILS DECRIPTION
sqe | description |
1 | Multiple die cutting heads. VR3350D works with multiple die cutting heads, up to 12 heads(3 stations) work at once, highly increase working efficiency. |
2 | CCD Camera Identify System. The CCD camera positioning and identify system can recognize the sequence codes of each jobs,so that job exchanges can be done automatically smooth during feeding and cutting. |
3 | Reflective photoelectric mark sensor. The positioning sensor scans the marked points printed on the material to obtain the cutting dies information and feed it back to the machine control system, so as to realize the digital cutting. |
4 | High Precision feeding Detection System(BST from Germany). Utilizing high precision ultrasonic web-guide system from Germany, make sure the paper feeding in correct way, ready for next die cutting step. |
5 | Cold lamination. Automatic lamination before die cutting, makes finishing labels more durable and more widely application. The back liner film remover is optional. |
6 | Automatic waste removal and tension system. Under the 6-axis automatic tension of the waste discharge system, the label cutting waste paper will be automatically removed and separated from the winding, so as to obtain a clean label roll for the next process. |
7 | Slitting system. Utilize square blades, automatically cut the label paper into small rolls as needed,up to 15pcs blades can be used. Maximum slitting speed can reach to 100m/min. |
8 | Down rewinder. Default main rewinder for roll to roll process. |
9 | Easy-to-use dedicated software. Running status can be seen in a real-time. Support file database. Choose the quantity of the heads based on graphics. Intelligent cutting with trajectory optimization. Adjust heads distance automatically. Auto-generate the working records. |
10 | Upper rewinder. (Optional) Optional upper rewinder to separate labels in every second row after slitting. |
11 | Inline Roll to Sheet Cutting System.(optional) The optional built-in sheet cutting module can be in-lined with the main die-cutting to perform the roll to sheet cutting process. |
12 | Film base paper removing device.(optional) In some areas, there is backing paper on the cold laminating film, which can be removed before laminating by this device. |
APPLICATIONS
Applicable Industry: VR3350D is mainly used in making all kinds of labels,Stickers, Paper, PP, BOPP, PET, PVC
SAMPLES