- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
VR320
Vicut
sqe | Features |
1 | Multiple die cutting heads. up to 4 heads work at the same time, highly increase working efficiency. |
2 | User friendly operation panel. The main operation buttons are integrated into the same panel for easy operation. Touch screen interface, sensitive response, easy to set machine parameters. |
3 | Digital cutting positioning sensor. The positioning sensor scans the marked points printed on the material to obtain the cutting dies information and feed it back to the machine control system, so as to realize the digital cutting. |
4 | Automatic deviation correction system. There are two optical sensors on both sides of roll holder, automatically adjust the paper offset to ensure the accurate feeding, lay a good foundation for further processing. |
5 | Platform for splicing materials. When you finish cutting a roll of label and prepare to cut another roll, you can use this platform to splice a new roll of material onto the one being processed, so as to realize smooth transition, save paper installation time and improve work efficiency. |
6 | Cold lamination. Automatic lamination before die cutting, makes finishing labels more durable and more widely application. |
7 | Automatic waste removal and tension system. Under the tension of the waste discharge system, the label cutting waste paper will be automatically removed and separated from the winding, so as to obtain a clean label roll for the next process. |
8
| Slitting system. Utilize square blades, automatically cut the label paper into small rolls as needed,up to 15pcs blades can be used. Maximum slitting speed can reach to 100m/min. |
9 | Automatic separate rewinding. Up and down independent winding shafts, automatically rewind the multiple label rolls after slitting. |
10 | Easy-to-use software. Dedicated software support PLT & DXF format file, it can choose the knife down point according to shapes, the unique trajectory optimization is for perfect cutting. |
11 | Maximum four cutting heads.(optional) The standard cutting heads for VR320 is 2pcs, user can choose maximum four die cutting heads as required. |
12 | Up to 15pcs Slitting units.(optional) The standard slitting units for VR320 is 4pcs, users can choose the quantity of slitting blades as required, up to 15pcs. The slitting functions can be used alone, as slitting-only-mode. |
13 | Film base paper removing device.(optional) In some areas, there is backing paper on the cold laminating film, which can be removed before laminating by this device. |
14 | Paper Cutter RS350.(optional) It is suitable for transverse cutting of various roll materials. Along with VR320 die cutter to achieve in-line working, with high cutting efficiency and accuracy. It can also be used independently. |
PROFILE
Model Name | Digital Label Die Cutter VR320 |
Maxi. roll diameter | 450mm |
Cutting media width | 40--340mm |
Max. label width | 320mm |
Max. label length | 400mm (segmentation cut reach to 1200mm) |
Mini. label length | 10mm |
Min. distance between labels | 2mm |
Min.distance from mark to edge | 2mm |
Min.distance between jobs | 2mm |
Max. die cutting speed | 6m per minute (depends on label shape and size) |
No. of die cutting heads | 2pcs(standard ), up to 4pcs. |
Die cutting blades | Tungsten steel blades |
Die cutting precision | 0.1mm (duplicate) |
Die cutting mark track mode | Non-mark, Single mark,double mark |
Slitting width | 10 ~ 310mm |
Slitting blades | 4pcs(standard ), up to 15pcs |
Slitting speed | 100m/min |
Slitting precision | 0.1mm |
Data transfer method | USB2.0/Ethernet 10/100Base-T/GPIO |
Working voltage | 110-240VAC 50/60HZ, 1000WATTS |
Machine dimension | 160*100*136cm(L*W*H) |
Weight(N.W/G.W) | Machine: 530kgs/640kgs Vacuum pump: 14kgs/16kgs |
Packing size | Machine: 1700*1150*1570mm Vacuum pump: 450*450*500mm |
Optional function | Multiple die cutting heads |
Multiple slitting units | |
Film base paper removing device | |
Roll to sheet cutter RS350 |
ACCESSORIES
1 | Vacuum pump. Vortex type air pump, power: 550W, speed: 2800r / min, with muffler and pressure change valve, connects to the cutting platform,fix the material on the cutting platform during the cutting process. |
2 | Blade holder. Precision blade holder, built-in bearing design, cooperate with machine blade compensation function, make cutting more smooth. Easy to install the blade and adjust the distance between the blade tips. |
3 | Die Cutting Blades. Special 45 degree die cutting blade, suitable for cutting 0.25 mm thick adhesive label materials such as sticker, coated paper, synthetic paper, PP, PET, etc. |
4 | Slitting blades. Tungsten steel square blades, higher cutting precision than traditional round blade. |
5 | Air compressor. |
sqe | Features |
1 | Multiple die cutting heads. up to 4 heads work at the same time, highly increase working efficiency. |
2 | User friendly operation panel. The main operation buttons are integrated into the same panel for easy operation. Touch screen interface, sensitive response, easy to set machine parameters. |
3 | Digital cutting positioning sensor. The positioning sensor scans the marked points printed on the material to obtain the cutting dies information and feed it back to the machine control system, so as to realize the digital cutting. |
4 | Automatic deviation correction system. There are two optical sensors on both sides of roll holder, automatically adjust the paper offset to ensure the accurate feeding, lay a good foundation for further processing. |
5 | Platform for splicing materials. When you finish cutting a roll of label and prepare to cut another roll, you can use this platform to splice a new roll of material onto the one being processed, so as to realize smooth transition, save paper installation time and improve work efficiency. |
6 | Cold lamination. Automatic lamination before die cutting, makes finishing labels more durable and more widely application. |
7 | Automatic waste removal and tension system. Under the tension of the waste discharge system, the label cutting waste paper will be automatically removed and separated from the winding, so as to obtain a clean label roll for the next process. |
8
| Slitting system. Utilize square blades, automatically cut the label paper into small rolls as needed,up to 15pcs blades can be used. Maximum slitting speed can reach to 100m/min. |
9 | Automatic separate rewinding. Up and down independent winding shafts, automatically rewind the multiple label rolls after slitting. |
10 | Easy-to-use software. Dedicated software support PLT & DXF format file, it can choose the knife down point according to shapes, the unique trajectory optimization is for perfect cutting. |
11 | Maximum four cutting heads.(optional) The standard cutting heads for VR320 is 2pcs, user can choose maximum four die cutting heads as required. |
12 | Up to 15pcs Slitting units.(optional) The standard slitting units for VR320 is 4pcs, users can choose the quantity of slitting blades as required, up to 15pcs. The slitting functions can be used alone, as slitting-only-mode. |
13 | Film base paper removing device.(optional) In some areas, there is backing paper on the cold laminating film, which can be removed before laminating by this device. |
14 | Paper Cutter RS350.(optional) It is suitable for transverse cutting of various roll materials. Along with VR320 die cutter to achieve in-line working, with high cutting efficiency and accuracy. It can also be used independently. |
PROFILE
Model Name | Digital Label Die Cutter VR320 |
Maxi. roll diameter | 450mm |
Cutting media width | 40--340mm |
Max. label width | 320mm |
Max. label length | 400mm (segmentation cut reach to 1200mm) |
Mini. label length | 10mm |
Min. distance between labels | 2mm |
Min.distance from mark to edge | 2mm |
Min.distance between jobs | 2mm |
Max. die cutting speed | 6m per minute (depends on label shape and size) |
No. of die cutting heads | 2pcs(standard ), up to 4pcs. |
Die cutting blades | Tungsten steel blades |
Die cutting precision | 0.1mm (duplicate) |
Die cutting mark track mode | Non-mark, Single mark,double mark |
Slitting width | 10 ~ 310mm |
Slitting blades | 4pcs(standard ), up to 15pcs |
Slitting speed | 100m/min |
Slitting precision | 0.1mm |
Data transfer method | USB2.0/Ethernet 10/100Base-T/GPIO |
Working voltage | 110-240VAC 50/60HZ, 1000WATTS |
Machine dimension | 160*100*136cm(L*W*H) |
Weight(N.W/G.W) | Machine: 530kgs/640kgs Vacuum pump: 14kgs/16kgs |
Packing size | Machine: 1700*1150*1570mm Vacuum pump: 450*450*500mm |
Optional function | Multiple die cutting heads |
Multiple slitting units | |
Film base paper removing device | |
Roll to sheet cutter RS350 |
ACCESSORIES
1 | Vacuum pump. Vortex type air pump, power: 550W, speed: 2800r / min, with muffler and pressure change valve, connects to the cutting platform,fix the material on the cutting platform during the cutting process. |
2 | Blade holder. Precision blade holder, built-in bearing design, cooperate with machine blade compensation function, make cutting more smooth. Easy to install the blade and adjust the distance between the blade tips. |
3 | Die Cutting Blades. Special 45 degree die cutting blade, suitable for cutting 0.25 mm thick adhesive label materials such as sticker, coated paper, synthetic paper, PP, PET, etc. |
4 | Slitting blades. Tungsten steel square blades, higher cutting precision than traditional round blade. |
5 | Air compressor. |
