- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
VR320
Vicut
APPLICATIONS
Applicable Industry: the label finisher is mainly used in producing wide range of labels ,such as blank labels, ink labels, chemical labels, beverage labels, bottled water labels, chili source labels,coffee labels, cosmetic labels, home appliance label,toiletries label, gum label,wine labels and more.
Applicable Materials: Stickers, Paper, PP, BOPP, PET, PVC & More!
DECRIPTION
sqe | description |
1 | Multiple die cutting heads. can work with multiple die cutting heads, up to 4 heads work at the same time, highly increase working efficiency. |
2 | User friendly operation panel. The main operation buttons are integrated into the same panel for easy operation. Touch screen interface, sensitive response, easy to set machine parameters. |
3 | Digital cutting positioning sensor. The positioning sensor scans the marked points printed on the material to obtain the cutting dies information and feed it back to the machine control system, so as to realize the digital cutting. |
4 | Automatic deviation correction system. There are two optical sensors on both sides of roll holder, automatically adjust the paper offset to ensure the accurate feeding, lay a good foundation for further processing. |
5 | Feeding detection system. After automatic deviation correction, there is an optical sensor to detect the material before feeding into the working table, make sure the paper feeding in correct way, ready for next die cutting step. |
6 | Vacuum suction cutting table. Vacuum inhaling cutting platform, the adsorption function starts along with die cutting, and automatically loosening valves after cutting finishes, to ensure cutting accuracy and smooth paper feeding. |
7 | Platform for splicing materials. When you finish cutting a roll of label and prepare to cut another roll, you can use this platform to splice a new roll of material onto the one being processed, so as to realize smooth transition, save paper installation time and improve work efficiency. |
8 | Cold lamination. Automatic lamination before die cutting, makes finishing labels more durable and more widely application. |
9 | Automatic waste removal and tension system. Under the tension of the waste discharge system, the label cutting waste paper will be automatically removed and separated from the winding, so as to obtain a clean label roll for the next process. |
10
| Slitting system. Utilize square blades, automatically cut the label paper into small rolls as needed,up to 15pcs blades can be used. Maximum slitting speed can reach to 100m/min. |
11 | Automatic separate rewinding. Up and down independent winding shafts, automatically rewind the multiple label rolls after slitting. |
12 | Well-organized control cabinet. Professional electrical design, orderly arrangement of components, clear circuit, easy maintenance. |
13 | Blower switch. Control the suction system. Before die cutting, press this button to start the vacuum adsorption function. |
14 | Network and USB Port. VR320 roll label cutter supports network port and U disk for die cutting files transmission. |
15 | E-stop button. If any emergency happens during machine working, press this button, the machine will stop instantly.You need to turn on the power to restart the machine. |
16 | Quality components. All kinds of components used in VR320 are top quality in the industry, such as THK precision class guide rail, imported synchronous belts, Inovance servo motor, etc. Ensures machine quality and longer service life. |
17 | Adjustable machine foot pads. VR320 is equipped with adjustable foot pads and mobile wheels. If the ground is uneven, the horizontal position of the machine can be ensured by adjusting the foot pads. A movable wheel is installed beside each foot pad for more convenient machine movement. |
18 | Easy-to-use software. Dedicated software support PLT & DXF format file, it can choose the knife down point according to shapes, the unique trajectory optimization is for perfect cutting. |
19 | Maximum four cutting heads.(optional) The standard cutting heads for VR320 is 2pcs, user can choose maximum four die cutting heads as required. |
20 | Up to 15pcs Slitting units.(optional) The standard slitting units for VR320 is 4pcs, users can choose the quantity of slitting blades as required, up to 15pcs. The slitting functions can be used alone, as slitting-only-mode. |
21 | Film base paper removing device.(optional) In some areas, there is backing paper on the cold laminating film, which can be removed before laminating by this device. |
PACKING
APPLICATIONS
Applicable Industry: the label finisher is mainly used in producing wide range of labels ,such as blank labels, ink labels, chemical labels, beverage labels, bottled water labels, chili source labels,coffee labels, cosmetic labels, home appliance label,toiletries label, gum label,wine labels and more.
Applicable Materials: Stickers, Paper, PP, BOPP, PET, PVC & More!
DECRIPTION
sqe | description |
1 | Multiple die cutting heads. can work with multiple die cutting heads, up to 4 heads work at the same time, highly increase working efficiency. |
2 | User friendly operation panel. The main operation buttons are integrated into the same panel for easy operation. Touch screen interface, sensitive response, easy to set machine parameters. |
3 | Digital cutting positioning sensor. The positioning sensor scans the marked points printed on the material to obtain the cutting dies information and feed it back to the machine control system, so as to realize the digital cutting. |
4 | Automatic deviation correction system. There are two optical sensors on both sides of roll holder, automatically adjust the paper offset to ensure the accurate feeding, lay a good foundation for further processing. |
5 | Feeding detection system. After automatic deviation correction, there is an optical sensor to detect the material before feeding into the working table, make sure the paper feeding in correct way, ready for next die cutting step. |
6 | Vacuum suction cutting table. Vacuum inhaling cutting platform, the adsorption function starts along with die cutting, and automatically loosening valves after cutting finishes, to ensure cutting accuracy and smooth paper feeding. |
7 | Platform for splicing materials. When you finish cutting a roll of label and prepare to cut another roll, you can use this platform to splice a new roll of material onto the one being processed, so as to realize smooth transition, save paper installation time and improve work efficiency. |
8 | Cold lamination. Automatic lamination before die cutting, makes finishing labels more durable and more widely application. |
9 | Automatic waste removal and tension system. Under the tension of the waste discharge system, the label cutting waste paper will be automatically removed and separated from the winding, so as to obtain a clean label roll for the next process. |
10
| Slitting system. Utilize square blades, automatically cut the label paper into small rolls as needed,up to 15pcs blades can be used. Maximum slitting speed can reach to 100m/min. |
11 | Automatic separate rewinding. Up and down independent winding shafts, automatically rewind the multiple label rolls after slitting. |
12 | Well-organized control cabinet. Professional electrical design, orderly arrangement of components, clear circuit, easy maintenance. |
13 | Blower switch. Control the suction system. Before die cutting, press this button to start the vacuum adsorption function. |
14 | Network and USB Port. VR320 roll label cutter supports network port and U disk for die cutting files transmission. |
15 | E-stop button. If any emergency happens during machine working, press this button, the machine will stop instantly.You need to turn on the power to restart the machine. |
16 | Quality components. All kinds of components used in VR320 are top quality in the industry, such as THK precision class guide rail, imported synchronous belts, Inovance servo motor, etc. Ensures machine quality and longer service life. |
17 | Adjustable machine foot pads. VR320 is equipped with adjustable foot pads and mobile wheels. If the ground is uneven, the horizontal position of the machine can be ensured by adjusting the foot pads. A movable wheel is installed beside each foot pad for more convenient machine movement. |
18 | Easy-to-use software. Dedicated software support PLT & DXF format file, it can choose the knife down point according to shapes, the unique trajectory optimization is for perfect cutting. |
19 | Maximum four cutting heads.(optional) The standard cutting heads for VR320 is 2pcs, user can choose maximum four die cutting heads as required. |
20 | Up to 15pcs Slitting units.(optional) The standard slitting units for VR320 is 4pcs, users can choose the quantity of slitting blades as required, up to 15pcs. The slitting functions can be used alone, as slitting-only-mode. |
21 | Film base paper removing device.(optional) In some areas, there is backing paper on the cold laminating film, which can be removed before laminating by this device. |
PACKING
